The Fibaro Heat Controller is the most intelligent thermostat ever. The simplicity combined with the capability of the heat controller makes it a must have in any smart home setup. You have the ability to plan and schedule your heating based on what room you need to heat at what time, and the temperature required in that time.

Features:

• rechargeable battery (micro usb)
• easy to install (no tools needed)
• supports weekly heating schedules
• automatic calibration
• anti-freeze function
• decalc function
• manual temperature change

Setup:

1. Connect the charger to the micro-uSB port to charge the device
2. Disconnect the charger when the LED ring pulses green (device fully charged)
3. Dismount your current thermostatic head
4. Depending on type of your thermostatic valve:
• M30 x 1.5 = Proceed normally
• Danfoss RTD-n = use adapter
• Danfoss RA-n = use adapter
• any confusion, contact us
5. Mount the device on the valve and tighten it by turning the cap clockwise