Cookie Settings
Nice RUN400HS Hi-Speed Sliding Gate Kit (24V, 14M, 400KG)

Nice RUN400HS 24v hi-speed sliding gate opener kit with electromechanical limit switch for sliding gates up to 400kg and 14m.

The fastest sliding gate system yet: ideal for industrial and residential applications, designed for intensive use. 

Opening and closing with rapid manoeuvres, the RUN400HS can open a 4m gate in around 6* seconds! 

* Considering standard installation, excluding acceleration and deceleration. 


Features

Safe and Intelligent

  • Fully compatible with Nice's Solemyo solar power kit and Opera management system for GPRS and Bluetooth connectivity / operation
  • Connection for EN compliant 8.2K safety edges
  • The Nice Run series is equipped with a temperature sensor which adapts the motor force to the climatic and environmental conditions, while adapting the thermal cut-out protection and self-ventilation intensity depending on temperature readings.
  • A master and slave selection can automatically synchronise two motors, this makes it possible to automate 2-leaf sliding gates set opposite each other
  • Features an obstacle detection system and automatic programming of opening times
  • Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre
  • Eight programming levels
  • The Run is capable of self-diagnosis, alerting the user to faults via flashing lights


Sturdy, Practical and User Friendly

  • Using Nice BlueBUS technology, the control unit can be connected to up to seven couples of photocells, control, security and signaling devices, using only two wires
  • The control unit and backup battery (sold separately) can be connected by means of a simple connector and can be housed directly inside the motor
  • The Run's gear motor is on bearings, resulting in very quiet and smooth operation
  • Strong and sturdy pressure die-cast aluminium design with epoxy painting
  • Aluminium release handle for easy opening


What's Included

  • 1 x RUN400HS Hi-speed electro-mechanical gear motor (24v)
  • 1 x RUA6 Integrated Control Unit
  • 2 x ON2E Transmitters
  • 1 x EPMB Pair of BlueBUS Photocells
  • 1 x OXI Receiver


Manuals

Nice RUN400HS / RUN1200HS Manual

Nice RUN400HS / RUN1200HS Quick Guide

Nice RUN400HS / RUN1200HS Datasheet

Dimensions
Dimensions (mm)400 x 255 x 387 (operator)
Weight (kg)24.5 (operator)
Drive
Motor TypeElectro-Mechanical
Electrical Data
Absorption (A)2
Motor Voltage24v
Power (W)415
Power Supply (Vac 50/60 Hz)230
Gate Specifications
Automation TypeSliding
Kit TypeSingle
Max. Gate Leaf Length (M)14
Max. Gate Weight (KG)400
Performance Data
Speed (m/s) >> 0.7 <<
Torque (Nm)409
Work Cycle (cycles/hour)60
Working Temp. (°C Min/Max)-20°C to +50°C
Technical
Protection Level (IP)44