This control panel can be replaced by the Rigel 6. 

The Rigel 5 is a BFT control panel for one or two 230v motors (max 375w) with independent force adjustment. Hugely popular control panel for use with swinging and sliding gate motors. Every requested function at your finger tips and very easy to use. 

The Rigel 5 is supplied with all our hydraulic kits and is the professional installers favourite. 

Features:

• Separate start commands. (Enter and Exit) 
• Separate Open and Close commands 
• Hold open facility on latching Open command 
• N/C Inputs for Photocells, block and safety edge 
• Open and Closed limit switch inputs for 2 motors 
• 12v Lock output and Reverse blow for lock release 
• 2 or 4 step logic 
• Optional plug in: Radio receiver / Traffic light board 
• Holding closed: Hourly pulse for hydraulic motors 
• Run time adjust: 0 – 100 seconds or 40 – 180 seconds