The Fibaro Single Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. The Fibaro Single Switch allows for the control of connected devices either via HomeKit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality. 

Features

• Compatible with Apple HomeKit technology, 
  
• Bluetooth® low energy technology for wireless communication, 
  
• Advanced microprocessor control, 
  
• Works with various types of switches – momentary, toggle, three-way, etc, 
  
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations, 
  
• FIBARO Single Switch is an extension unit. 
  

Setup

1. Switch off the mains voltage (disable the fuse). 
   
2. Open the wall switch box. 
   
3. Connect with one of following the diagrams (see manual here) for appropriate device
   
4. After verifying correctness of the connection switch on the mains voltage. 
   
5. Pair the device (see manual here)
   
6. Turn off the mains voltage, then arrange the device in a wall switch box. 
   
7. Close the wall switch box and turn on the mains voltage.