Replaces traditional wired inductive loops, saving you time and money while increasing reliability! 

Features 

e-LOOP Commercial

• Fast and simple installation. 
  
• Just 26mm in height and 200mm in diameter; slim profile. 
• Not influenced by ground movement. 
• 10600 mA battery with up to 10 years life span. 
• 128-bit high-security encryption. 
• Up to 50-metre range. 
• Produced from high-impact plastic (10-tonne static load limit). 

• Bi-directional wireless access control system for gate and door applications.
  
• Compact design with exceptional range.
• SMA connector as standard for an optional long-range antenna connection.
• Ideal for commercial multi-unit complexes with up to 200 units.
  
• Simple to use menu functions with LCD display.
• The unique lock-out feature allows you to lock out entry buttons, e-Loops and keypads using the lock and unlock function on the e-Remote.
  
• Ability to delete individual remote devices.
• Ability to connect to the e-Loop to access menus and change settings.
• Test mode which allows you to test relay outputs, radio signal strength and radio interference.

Installation

Complete your installation in 3 simple steps!

1. Code in e-Loop.
2. Secure e-Loop to the driveway.
3. Calibrate e-Loop... and you're ready to operate in less than 15 minutes.

Save many hours of installation time compared to wired loop systems!

Kit Contents

• 1 x EL00C e-LOOP Commercial Loop EXIT MODE
  
• 1 x E-TRANS-200 e-LOOP Transceiver with LCD Screen
• 2 x DYNABOLTS Fixing Bolts

Support Documents

• AES e-LOOP Commercial Loop Kit EXIT MODE Manual
• AES e-LOOP Commercial Loop Kit EXIT MODE Datasheet
• AES e-LOOP Commercial Loop Kit Fitting Instructions
• AES E-TRANS-200 Transceiver Manual
• AES E-TRANS-200 Transceiver Datasheet

Attributes

e-LOOP Commercial:

• Static Load Capacity: 10 tonnes
  

• High sensitivity 433 MHz -126 dBm receiver with 20 dBm Transmission output.
• Wide input voltage range from 10V to 36V ACDC.
  
• 2 relay outputs with the ability to set to Pulse, Hold or Latch mode.
• Selectable ultra-low standby power consumption of only 4.5 m/a making it ideal for solar applications.
• 200 code storage with remote ID selection making it ideal for unit applications.