Replaces traditional wired inductive loops, saving you time and money while increasing reliability! 

Features 

e-LOOP Commercial

• Fast and simple installation. 
  
• Just 26mm in height and 200mm in diameter; slim profile. 
• Not influenced by ground movement. 
• 10600 mA battery with up to 10 years life span. 
• 128-bit high-security encryption. 
• Up to 50-metre range. 
• Produced from high-impact plastic (10-tonne static load limit). 

• Bi-directional wireless access control system for gate and door applications.
  
• Compact design with exceptional range.
• SMA connector as standard for an optional long-range antenna connection.
• Single channel

Installation

Complete your installation in 3 simple steps!

1. Code in e-Loop.
2. Secure e-Loop to the driveway.
3. Calibrate e-Loop... and you're ready to operate in less than 15 minutes.

Save many hours of installation time compared to wired loop systems!

Kit Contents

• 1 x EL00C e-LOOP Commercial Loop EXIT MODE
  
• 1 x E-TRANS-50 e-LOOP Transceiver
• 2 x DYNABOLTS Fixing Bolts

Support Documents

• AES e-LOOP Commercial Loop Kit EXIT MODE Manual
• AES e-LOOP Commercial Loop Kit EXIT MODE Datasheet
• AES e-LOOP Commercial Loop Kit Fitting Instructions
• AES E-TRANS-50 Transceiver Datasheet
• AES E-TRANS-50 Transceiver Instructions

Attributes

e-LOOP Commercial:

• Static Load Capacity: 10 tonnes
  

• Voltage Range: 10-36V DC
  
• Low Current Draw: standby = 4.5 m/a active = 30 m/a
  
• Frequency: 433.39 MHz
  
• Remote Storage: 50 x remotes, 4 x e-loops, 4 x keypads, 4 x entry buttons
  
• Relay: 1-amp contact rating, COM and N/O connections x 1 relay
  
• Modes: pulse, latch and hold